제품

This vacuum drying oven is designed for vacuum drying of transformer active components. The equipment is designed and manufactured with rich experience and advanced technology. Compared with similar products, it can save about40-50%Drying time. It adoptsPLCAutomatic control for transformer products and other electrical products10KVAnd33KVDrying process.

Application
10-110KV/100MVAClass I transformer body drying
110-500KVStage I transformer winding drying
110-1000KVLevel current/Drying of voltage reactor body

Capacitor is dry
Other electrical materials drying

Features:

1.The advanced vacuum system design releases enough condensed water in the low temperature condenser to effectively prevent the contamination of the vacuum pump caused by moisture during the drying process.

2.According to the temperature of the chamber body in the heating process, and periodically reduces the vacuum pressure in the tank to a certain value, so as to create the most suitable condition for the evaporation of water in the insulation body and make the water in the drying process in a reasonable and optimal state.

3.Through the alternate pressure drying process, the product can effectively solve the problem of iron core rust in the drying process.

4.The automation level of the equipment and the product level of the treatment process have reached the international advanced level, and the product quality has reached the excellent level of the industry.

Main components

1.Vacuum tank………………………………………………… .. 1Set

2.Trolley and drive……………… 1Set

3.Vacuum pump system………………………………………… 1Set

4.Low temperature condensate system………………… .…… .1Set

5.Heating system………………………… ..…………………… .1Set

6.Pneumatic piping system……………… ..………… .……… 1Set

7.Cooling water system…………………… ..………………… .. 1Set

8.Hydraulic system……………………………………………… 1Set

9.Control System…………………………………… 1Set