제품
홈 >
Ultra-high pressure water jet cutting machine
Ultra-high pressure water jet cutting technology is a high-tech that gradually emerged in the 1990s. Its basic principle is to increase the pressure of ordinary tap water to 100-400Mpa through a pressurizing device (high-pressure pump), and then spray it through a nozzle with a diameter of about φ0.1-0.4mm, forming a high-speed "water arrow" with a speed of 800-1000m/s (about three times the speed of sound). This water arrow can be used for cutting soft base materials and surface cleaning. If abrasive is added to the water arrow, this abrasive jet can be used to cut almost all materials.
high-pressure waterjet cutting technology can cut a wide range of materials using pure water or water mixed with abrasive for very hard materials. The precision and power of the jet enable high-precision cutting, even of complex shapes.Our water jet cutting machine is mainly composed of a CNC cutting platform, ultra-high pressure pump, sand-adding cutting system, automatic abrasive supply system,cooling system, online automatic desanding system, and wastewater sedimentation
and filtration device, among others.
Compared with traditional thermal cutting, water jet cutting has the following advantages:
- No material restrictions, capable of cutting almost any soft or hard material.
- Cold cutting, no heat is generated during the cutting process, eliminating thermal deformation and heat-affected zones.
- High efficiency and good surface quality.
- Can cut any complex shape without the need for molds or special fixtures.
- Small cutting gap, saving materials.
- Environmentally friendly, no toxic smoke or dust, and does not cause new industrial pollution
Item | Name | Description | Details | |
1 | Structure | /Cantilever Type/Separate Working Tale/Three-side way, easy to load and unload material/Broader applicability: can cut bigger size sheet than cutting size/Stroke of X-axis：3000mm/Stroke of Y-axis: 1200mm /Stroke of Z-axis: 200mm |
| |
2 | BASE and Beam | /Heat treatment Welding Base/High Rigid Cross Beam/New Balance Design/Built-in Balance Weight |
Welding Body |
Beam |
3 | Outgoing Direction of the Control Cable | /The installation direction of the control cable is optional(Left or Right)/Make sure the cabinet on the same side when two machine face to face installed for space-saving |
Control Cable Side(R) |
Power Supply Side(L) |
4 | Integrated Slider | /Casting Slider/Integrated design to reduce the accumulate error |
Casting Slider |
Integrated Slider |
5 | Protective Cover | /Stainless protective cover(Base)/Galvanized sheet steel collection tank on the bottom of the casting body/Steel cover for beam |
Steel Cover for Beam |
Stainless Protective Cover |
More technical Details About SmartJet120C Waterjet Cutting Table
Galvanized Sell colletion | Stainless Protetive Cover | |||
6 | X-YTransmission System | /PMI High Precision Linear Guide/PMI High Precision Ball Screw |
Linear Guide |
Ball Screw |
7 | Working table | /Separated Working Table/Strip support/Support beam height＞300mm，sturdy and durable/Hight of the table:850mm，easy to load and unload |
Strip Support |
Rubber strips |
8 | Z-axis System | /Aluminum profile structure/PMI linear guide(TBI)/PMI Ball Screw(TBI)/Enclosed protective design |
Aluminum ProfileStrucure |
Enclosed Protective Cover |
9 | Lubricating System | /Automatically Lubricate/Level indicating/Oil circuit distribute |
Automatically Lubricate |
Oil circuit distributor |
10 | Independent mobile operating cabinet | /Independent mobile operating cabinet/i-Telli PC control/English Version/ WEIHONG Control System/USB Interface |
|
|
USB Interface |
| |||
11 | Handwheel | /Wireless Hand Wheel(For WH) |
Wireless Hand Wheel | |
12 | Electrical System |
Yaskawa AC Servo |
Schneider Elements | |
Yaskawa AC Motor |
Flexible cable | |||
13 | UHP ON/OFF VALVE | /Pneumatic Valve |
|
14 | ACSIntegrated Abrasive Cutting Head | /Integrated Cutting Head Body/Mix Chamber/Max.Orifice Size 0.33(0.013”)/Nozzle Size:1.02(0.02”) |
| Technologyfrom ERTI( USA) |
15 | PACPrecision Abrasive Controller | /Transparent visible abrasive hopper/Manual control/Precision Control |
|
|
18 | Document | /Packing List/Qualified Certificate/Safety Operation Specification/User Operation Manual(For Cutting Machine)/User Operation Manual(For UHP Intensifier Pump)/Maintenance Guide | ||
19 | Others | We can provide customized service for painting, logo or other requirements. | ||
연락처를 남겨주시면 영업 시간에 연락드리겠습니다
