Products

This reactor winding machine is specially designed for the reactor industry. In contrast to the transformer winder, it uses two chucks and two servomotors instead of spools. If necessary, the machine can be equipped with an electric anti-tension device to make the coil more tightly wound.

The machine can directly wind the coil on the square section iron core column. Both the winding panel and the tailstock support panel are equipped with clamping arms suitable for square cores. The clamping thickness of the clamping arm is adjustable, the adjustment mode is screw type, and the adjustment range is0-360mm; The width adjustment range of the clamp arm is0-180mm? To adapt to different specifications of iron core. Both the winding panel and the tailstock support panel are double winding motors with the same winding torque at both ends.

The double guide rail protection of the clamp ensures good synchronism of the up and down movement of the clamp. (Other manufacturers do not have double guide rails, so there will be a gap in the production process, and the gap will become larger and larger, resulting in the failure of synchronization, or even the distortion of the core material. Mounting rails compensate for these deficiencies.) One set of equipment is equipped with two synchronous clamps.